Duraplate uhs data sheet.

A low-temperature application and curing version of our Dura-Plate® 301K ultra-surface and moisture-tolerant high-solids epoxy coating platform, Dura-Plate® 301W may be applied at ambient and substrate temperatures as low as 35°F (2°C). It is engineered to provide outstanding adhesion and anti-corrosion performance over a wide range of ...DURA-PLATE® UHS Epoxy (Part B) Green Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Jan 2, 2019 · PDS Dura-plate UHS Primer - Issue 3.indd. PRODUCT DESCRIPTION. RECOMMENDED USES. For use over prepared steel or concrete surfaces in industrial …Safety data sheets (SDS) are important documents that provide information about hazardous chemicals and how to safely use them. Clorox bleach is a common household cleaning product...DURA-PLATE® UHS Epoxy (Part A) OAP Blue Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer …

Novolacs. Nova-Plate UHS. Nova-Plate UHS is a solvent free, edge retentive epoxy novolac with proven long term performance as a lining for bulk storage tanks, pipe internals and secondary containment where a higher degree of resistance is needed.

***Dura-Plate 8200, Sherfl ex, Dura-Plate UHS, and Sher-Glass FF Macropoxy 5500LT - for atmospheric service Tank Clad HS - for atmospheric service ***consult your Sherwin-Williams representative for immersion suitability The systems listed above are representative of the product's use, other systems may be appropriate. CONCRETE P $ … Dura-Plate UHS is suitable for application through normal airless spray equipment. Available air pressure and capacity of spray equipment should be at least 5.0kg cm-2 and 7.0m3 per minute (70 p.s.i. and 250 c.f.m.). Airless spray equipment should be in good working order.

Dura-Plate UHS Sher-Plate PW *Maximum of 28.0 mils (700 microns) for entire system The systems listed above are representative of the product's use, other systems may be appropriate. D (2 " + (, $ 1 The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams ...Dura-Plate® 7550. A two-component, epoxy phenolic lining. A high solids, flexible coating, Dura-Plate® 7550 is designed to protect product purity across a broad range of cargos during loading, unloading, transport, and storage in rail cars and fixed site storage tanks. ... Data Sheets; Product Overview Benefits Ambient temperature cure;PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray. Revisado: Mayo 30, 2023. DURA-PLATE UHS es un epoxi retentivo de bordes de ultra alto contenido en sólidos con un rendimiento probado a largo plazo como revestimiento para tanques de almacenamiento a granel, tanques de lastre, interiores de tuberías y contención secundaria. Se aplica mediante pulverización sin aire normal o plural. Sherwin-Williams is dedicated to superior product stewardship and workplace safety. Globally Harmonized System - Safety Data Sheets (GHS-SDS), Product Data Sheets (PDS), and Environmental Data Sheets (EDS) are available for all Sherwin-Williams professional paint products and outline technical specifications, specific ingredient composition ...

to obtain the most recent Product Data Sheet. DURA-PLATE® UHS EPOXY TANK LINING. Title: Dura-Plate UHS_1301-1.indd Author: dxg719 Created Date: 6/9/2023 4:08:23 PM ...

DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming.

linings, such as Sherwin-Williams Poly-Cote™ 115, Dura-Plate® 6100, Dura-Plate® 6000 and Dura-Plate® UHS, requires a relatively uniform dry film thickness to resist drying shrinkage and thermal movement of the concrete, while maintaining a seamless bridge or seal over the concrete. Therefore, it is critical that all mortar splatter,DURA-PLATE® UHS Epoxy (Part B), Hardener - Clear MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).A two-component, amine-cured, glass-and ceramic-filled tank lining that utilizes advanced novolac technology. Utilizing advanced novolac technology, Nova-Plate® 325 is engineered to protect cargo and steel tank and vessel interiors from aggressive chemicals stored and processed at high temperatures and high pressures.DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II D335A DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this …Duraplate 301 Dura-Plate 235: Best Resistance Least Resistance: ... ta sheets for specific da Offshore structures use information ... te UHS Dura-Pla plate 301 Dura Nova-Plate 325 ank Clad HS Epoxy T -Glass FFSher; Ketimines; Macropoxy 920 PrePrime; Phenalkamines ; te 235Dura-Pla;Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. • Airless Spray • Low odor • High fl ash point, >200°F (93°C) • Low Temperature Hardener for applications from 40°F to 77°F (4.5°C to 25°C) • NSF approved to Standard 61/600 for potable water (tanks of ...

An ultra-surface and moisture-tolerant high-solids epoxy coating, Dura-Plate® 301K is engineered to provide outstanding adhesion and anti-corrosion performance over a wide range of surface preparation …DURA-PLATE™ UHS: A two component, ultra-high-solids epoxy amine tank lining. D335: EPO-PHEN™ FF: A two component, flake-filled MIO, amine-cured, epoxy phenolic novolac coating. E350: FAST CLAD™ ER: A two component, fast-drying, ultra-high-solids epoxy tank lining with Opti-Check™, Optically Activated Pigments (OAP) technology. E130 ...Dura-Plate UHS Primer. A two-component, ultra high-solids epoxy amine. ... Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the Datasheets tab above ...Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range of …Refer to the SDS sheet before use. Published technical data and instructions are subject to change without notice. Contact your Sherwin-Williams representative for additional technical data and instructions. P I R $ ".,, $-# $ # S 8 2 3 $, 2 Dry Film Thickness / ct. Mils (Microns) Steel: 1 ct. Dura-Plate8200 12.0-35.0 (300-875) Steel:DURA-PLATE® UHS Epoxy (Part B) - Hardener - Clear Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B62V210 DURA-PLATE® UHS Epoxy (Part B) - Hardener - Clear SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this …

DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete, steel and iron in severe service environments including splashzone areas on off shore platforms, wharf piles, jetties, chemical plants, pulp and paper mills and water treatment plants.Surface Preparation: BS EN ISO 8501-1 2007 Sa21⁄2. System Tested: 1 ct. Dura-Plate UHS @ 450 microns dft. Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 20.8 mg loss cycles, 1 kg load.

DURA-PLATE® UHS EPOXY. Sherwin-Williams Protective & Marine Coatings Dura-Plate® UHS Epoxy. Description. Dura-Plate® UHS is an ultra high solids epoxy amine engineered specifically for immersion service in ballast tanks, oil tanks, and refined fuel storage tanks.Paint or paint related material. Manufacturer : THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115. Emergency telephone number of the company : US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year. Product Information Telephone Number : US / Canada: …DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete and steel in severe service environments with fast return-t...Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Primer is formulated specifically as a primer for use under Dura-Plate UHS topcoat. The primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces.Jun 7, 2023 · DURA-PLATE™ UHS FAST CURING SOLVENT FREE EPOXY LINING FEATURES • Fast curing to service +/- 4 days • Single coat application • Opti-Check …Product Description: DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C).EV Battery and Automotive industries are rapidly changing, at Sherwin-Williams we support industry leading technologies that help protect assets, extended lifecycles and reduce rework with our sustainable solutions. Fire Protection. Adopt a safety-first mentality with life-saving protection from fires, cryogenic spills and corrosion.A two-component, modified epoxy phenalkamine. Dura-Plate® 235. A two-component, modified epoxy phenalkamine. Formulated specifically for immersion and atmospheric service in marine and industrial environments, Dura-Plate® 235 Multi-Purpose Epoxy provides exceptional performance in corrosive environments and can be applied at temperatures as low as 0°F (-18°C).A two-component, amine-cured, glass-and ceramic-filled tank lining that utilizes advanced novolac technology. Utilizing advanced novolac technology, Nova-Plate® 325 is engineered to protect cargo and steel tank and vessel interiors from aggressive chemicals stored and processed at high temperatures and high pressures.

A two-component, PFTE, inert, flake-reinforced novolac tank lining. Nova-Plate® 360 can be applied by single-leg airless or plural-component airless application with return to service times in as little as 24 hours. It has excellent abrasion resistance and it incorporates Optical Activated Pigment (OAP) technology to improve the accuracy and ...

In today’s data-driven world, the ability to effectively present and analyze data is crucial for businesses and professionals. Microsoft Excel, a widely-used spreadsheet program, o...

1 Ct. Dura-Plate UHS 18.0-22.0 (450-550) The systems listed above are representative of the product's use, other systems may be appropriate. ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such informa-DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Safety data sheets (SDS) are important documents that provide information about hazardous chemicals and how to safely use them. Clorox is a popular household cleaning product that ...1 ct. Dura-Plate 2300 as needed to fi ll surface imperfections 1 ct. (Optional) Primer as defi ned above 1 ct. Dura-Plate 6000 60.0-125.0+** (1,500-3,125) ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company.The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such information and recommendations set forth herein are subject to change andDURA-PLATE® UHS Epoxy Primer (Part A) Gold Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer : THE SHERWIN ...Apr 25, 2024 · Data Sheets. Benefits. Easy to apply. Low odor. Chemical resistance. Corrosion resistance. Brand. Dura-Plate®. Industry. Oil and Gas. Water and Wastewater. … A two-component, ultra high-solids epoxy amine. Dura-Plate® UHS. A two-component, ultra high-solids epoxy amine. Engineered specifically for immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Epoxy provides superior protection through its high-build, edge-retentive properties as compared to conventional epoxies. This UHS lining is suitable for low-temperature applications and cures at 25°F (-3°C). Fast-Clad ER’s formulation is balanced to maintain required application properties over a range of film thicknesses and edge retention (>70%). Plural application equipment is required to apply Fast-Clad ER due to the product’s material characteristics.DURAPLATE UHS PRIMER - Free download as PDF File (.pdf), Text File (.txt) or read online for free. DURAPLATE UHS PRIMERClick to view larger image. Dura-Plate® UHS. A two-component, ultra high-solids epoxy amine. Engineered specifically for immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Epoxy provides superior protection through its high-build, edge-retentive properties as compared to conventional epoxies.When it comes to cleaning and disinfecting, Clorox is one of the most trusted brands. But when it comes to storing and handling Clorox, it’s important to make sure you’re doing so ...

A two-component, ultra high-solids epoxy amine. Dura-Plate® UHS. A two-component, ultra high-solids epoxy amine. Engineered specifically for immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Epoxy provides superior protection through its high-build, edge-retentive properties as compared to conventional epoxies. Back Safety Data Sheets Back Para Los ... DURA-PLATE UHS Ultra High Solids N Epoxy (Part B) {{ ctrl.bvAvgRatingForScrReaders }} Star rating out of 5 Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. NSF approved to Standard 61/600 for potable water (tanks of 1000 gallons or greater and pipes of 40" diameter or greater.) Material should be at least 50°F (10°C) for optimal performance.Data Sheets. Benefits. For use over prepared steel or concrete surfaces in industrial and marine exposures. Oil storage tank interiors, refined fuel storage tanks, potable water tanks, water pipes. Water and waste treatment plants, buried pipe applications, primary and secondary containment areas.Instagram:https://instagram. kalahari groupon 2023lyon auction bushnell flbrookhaven town parking permitchillin on beale street kingman az DURA-PLATE™ UHS: A two component, ultra-high-solids epoxy amine tank lining. D335: EPO-PHEN™ FF: A two component, flake-filled MIO, amine-cured, epoxy phenolic novolac coating. E350: FAST CLAD™ ER: A two component, fast-drying, ultra-high-solids epoxy tank lining with Opti-Check™, Optically Activated Pigments (OAP) technology. E130 ...DURA-PLATE® UHS Epoxy (Part B) Green Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: henry 22 magnum lever action valueobituary quincy ma A two-component, ultra high-solids epoxy amine. Engineered specifically for immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Epoxy provides superior protection through its high-build, edge-retentive properties as compared to conventional epoxies. Interested in learning more or purchasing this ... emissions testing skokie il hours PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray.Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. • Airless Spray • Low odor • High fl ash point, >200°F (93°C) • Low Temperature Hardener for applications from 40°F to 77°F (4.5°C to 25°C) • NSF approved to Standard 61/600 for potable water (tanks of ...